Mini-Uniones y Rácores |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
¡NUEVO! μ-Union SilTite™ |
Tipo |
D.I. Col. 1 mm | D.I. Col. 2 mm | Pk. Unión+Ferula | Referencia | Proveedor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SilTite™ μ-Union
|
0.1-0.25mm | 0.1-0.25mm | 2+5(0.1-0.25mm) | 073560 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.25mm | 0.32mm | 2+5(0.1-0.32mm) | 073561 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.25mm | 0.53mm | 2+5(0.1-0.53mm) | 073562 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32mm | 0.32mm | 2+5(0.32mm) | 073563 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32mm | 0.53mm | 2+5(0.32-0.53mm) | 073564 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.53mm | 0.53mm | 2+5(0.53mm) | 073565 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Baja Masa Térmica y sin Volumen Muerto - Sólo 9 mm y <0.5 g |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tipo |
D.I. Col. 1 mm | D.I. Col. 2 mm | Pk. | Referencia | Proveedor | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ferrulas recambio para μ-Union | 0.1-0.25mm | 0.1-0.25mm | 5 | 073566 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.25mm | 0.32mm | 5 | 073567 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.25mm | 0.53mm | 5 | 073568 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32mm | 0.32mm | 5 | 073569 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32mm | 0.53mm | 5 | 073570 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.53mm | 0.53mm | 5 | 073571 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tipo |
D.I. Col. 1 mm | D.I. Col. 2 mm | Pk. | Referencia | Proveedor | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
μ-Union recambio (sin ferrulas) | 0.1-0.32mm | 0.1-0.32mm | 1 | 073572 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.32mm | 0.53mm | 1 | 073573 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.53mm | 0.53mm | 1 | 073574 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
¡NUEVO! SilFLOW™ |
Tecnología SilFLOW™ de SGE para control de Fluidos |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SGE reconoce la necesidad de los cromatografistas actuales
de pasar de la tecnología actual de sistema fluídicos basados en
tubo a sistemas planares tipo microcanal SilFLOW™ que
permiten soluciones más flexibles tanto para Cromatografía de
Gases como la de Líquidos. En ambas técnicas
es esencial diseñar sistemas microfluídicos que minimicen los
volúmenes muertos y se puedan alcanzar las máximas prestaciones
cromatográficas del sistema. SilFLOW™ se basa en la capacidad de SGE tanto en fabricación como en diseño:
Con la tecnología SilFLOW™ SGE dispone de un control dimensional preciso entre 25 y 800 mm que permite incorporar restricciones (para lógica de fluidos) como intersecciones (T's). En configuraciones más complejas, se pueden fabricar hasta 8 canales en capas múltiples. (Contáctenos para evaluar sus necesidades específicas.) La experiencia de SGE en el tratamiento de superficies metálicas ha permitido el desarrollo de tecnologías de desactivación que aseguran que los canales metálicos en SilFLOW™ ofrecen el mismo grado de desactivación que las columnas capilares de sílice. Vea información detallada AQUÍ. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mini-Unión GLT™ |
Tipo |
D.I. Col. 1 mm | D.I. Col. 2 mm | Pk. Unión+Ferula | Referencia | Proveedor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mini-Unión GLT™ Para conexión de columnas FSOT del mismo o diferente diámetro. Unión sin fugas y de bajo volumen muerto. Temperaturas hasta 450ºC. |
0.05-0.1 | 0.05-0.1 | 1+5 (0.05-0.1mm) | 103430 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.25 | 0.1-0.53 | 1+5 (0.1-0.25mm) | 103431 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32 | 0.32-0.53 | 1+5 (0.32mm) | 103432 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.45-0.53 | 0.45-0.53 | 1+5 (0.45-0.53mm) | 103433 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tipo |
D.I. mm | Material | Pk. | Referencia | Proveedor | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ferrulas Recambio para Mini-Unión | <0.1 | Vespel-Grafito | 10 | 072695 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.1-0.25 | Vespel-Grafito | 10 | 072696 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32 | Vespel-Grafito | 10 | 072697 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.53 | Vespel-Grafito | 10 | 072698 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" | Vespel-Grafito | 10 | 072693 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ciegas | Vespel-Grafito | 10 | 072694 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tuercas Recambio para Mini-Unión | - | - | 5 | 103400 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mini-Unión SilTite™ |
Tipo |
D.I. Col. 1 mm | D.I. Col. 2 mm | Pk. Unión+Ferula | Referencia | Proveedor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mini-Unión SilTite™ Para conexión de columnas FSOT del mismo o diferente diámetro. Unión sin fugas y de bajo volumen muerto. Temperaturas hasta 450ºC. Para GCMS. |
0.1-0.25 | 0.1-0.53 | 1+5 (0.1-0.25mm) | 073550 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32 | 0.32-0.53 | 1+5 (0.32mm) | 073551 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.42-0.53 | 0.45-0.53 | 1+5 (0.45-0.53mm) | 073552 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tipo |
D.I. mm | Material | Pk. | Referencia | Proveedor | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ferrulas Recambio para Mini-Unión | 0.25 | Metal | 10 | 073470 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.32 | Metal | 10 | 073471 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
0.53 | Metal | 10 | 073472 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tuercas Recambio para Mini-Unión | - | - | 5 | 073553 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tuercas Estd. para Racores SGE |
Tipo |
D.I. mm | Material | Pk. | Referencia | Proveedor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tuercas Estándar
para Racores SGE. Requieren ferrulas reductores cortas. |
1/16" | Acero 316 | 5 | 103403 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" | Latón Niquelado | 5 | 103404 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.2 mm | Acero 316 | 5 | 103400 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Macho 1/16" | Acero 316 | 5 | 1034030 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tuercas Largas para Racores SGE |
Tipo |
D.I. mm | Material | Pk. | Referencia | Proveedor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tuercas Largas para
Racores SGE. Requieren ferrulas reductores cortas. |
1/16" x 1.2 mm (miniracor) | Latón Niquelado | 2 | 1034085 | SGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/16" x 1.2 mm | Latón Niquelado | 5 | 1034085 | SGE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Kit de Precolumna para Columnas Capilares. Ferrulas SilTite. |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tapones para columnas Capilares |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Uniones Universales de Cuarzo Press-Fit |
|
Publicaciones disponibles en Tubos | Tipo | |
Simplify your GC Connections Chemically inert Enabled by SGE’s expertise in surface chemistry, each metal surface is treated to ensure optimized chromatography. Superb operational stability All of SGE’s GC Connections are manufactured from high grade stainless steel, and have minimal thermal mass, ensuring there is minimal thermal lag during use. The use of stainless steel also means there is no practical limit to their maximum temperature, the only limitation is the temperature rating of the GC column. Low dead volume SilTite™ FingerTite and SilFlow™ FingerTite ferrules used in SGE GC Connections result in low dead volume fittings giving you optimal peak shapes. Easy to install and leak free Each of SGE’s GC Connections are designed with FingerTite fittings that are easy to set up and can be tightened using finger force to achieve a perfect, reliable seal, even for the most sensitive MS systems – no wrenches required! |
Hoja Producto. 426 Kb | |
SilTite™ μ-Union
Installation Instructions Congratulations! You have purchased the latest innovation in GC capillary column connections from SGE Analytical Science. The SilTiteTM μ-Union for capillary columns enables a leak-free, low dead volume, low thermal mass connection system designed to be self installed using this installation manual. |
Manual Uso. 203 Kb | |
Glass Lined Tubing (GLT™)
Combining strength and inertness.
What is GLT? GLT (Glass Lined Tubing) was invented and patented by SGE to address the problem of achieving a completely inert chromatographic system. It is made by fusing an borosilicate glass lining onto the inside surface of stainless steel tubing. GLT can either be used as straight tubing or it can be machined or shaped into virtually any chromatography accessory. The options are limitless. |
Hoja Producto. 122K | |
What is PEEKsil™ tubing? PEEKsil™ is polymer-sheathed fused silica tubing, available in outside diameters of 1/32 inch or 1/16 inch, and now in 0.36mm. The sheathing polymer is polyether ether ketone (PEEK) that is mechanically strong and has ideal characteristics for sealing with conventional metal or polymer ferrule systems. PEEKsil may be used as a direct replacement for conventional stainless steel as well as a replacement for PEEK tubing used in liquid chromatography systems. The new 0.36mm OD material allows it to be used directly in place of 0.36mm OD fused silica tubing. |
Hoja Producto. 57K | |
Scientific Tubing Glass Lined Tubing (GLT™) PEEKsil™ Tubing Fused Silica Tubing |
Hoja Producto. 980K | |
DEACTIVATED CAPILLARY TUBING Extensive Range of Column Diameters and Surface Deactivations |
Hoja de Producto. 517k | |
Precolumnas y Bucles de Retención. Una precolumna y un bucle de retención son el mismo tipo de accesorio pero con objetivos diferentes. Ambos son un tubo de sílice desactivada, ó en los sistemas más modernos, un tubo de sílice pretratada tipo metilsilicona (Fase Tipo 1), fenilmetilsilicona (Fase Tipo 5) ó polietilenglicol (Fase Tipo Wax) de 2 a 5 metros que se instala entre el inyector y el comienzo de la columna. (ver Figura). |
Hoja de Aplicación. 54K | |
Using The SGE MVSU Mini-Union |
Manual Uso. 30 Kb | |
Retention Gap Kits RGK-1, RGK2 Introduction. Retention Gap Kits can serve several purposes... |
Hoja Producto. 273Kb | |
Glass Lined Tubing (GLT™) The best connection tubing for Capillary LC • Inert smooth flow path, to minimize band broadening • Precise inside bore diameter • Flexible and robust • Lower sample carry over, compared to other types of tubing • Perfectly square cut and polished ends • Capable of withstanding high pressures |
Hoja Producto. 70K | |
Consejos del Experto | ||
No utilice tubos de material polimérico en la conducción de gases de alta pureza: suelen ser permeables al oxígeno y crean un fondo innecesario que limita la sensibilidad instrumental. | ||
Use siempre tubo metálico limpio. El tubo estándar suele tener restos de material lubrificante ó material de protección que suele contaminar las líneas neumáticas ó hidráulicas de los instrumentos. | ||
Use siempre tubo del menor diámetro interno y con la longitud mínima necesaria en su aplicación: limite en lo posible los volúmenes muertos. |
Copyright© 2006-2014 CromLab S.L. Prohibida la reproducción total o parcial sin consentimiento escrito del propietario.